If You're Searching For A Complete Cable Railing System, Look No Further.

Design Rail by Feeney offers a maintenaince free Cable Rail system using powder coated Aluminum Posts

Customize Your Railing - DesignRail® Aluminum Posts
	Posts are made from heavy duty 2-3/8" square tube extrusions and come pre-cut to meet minimum railing height standards for residential (minimum 36" & 38" high) or commercial (minimum 42" high). Posts also come pre-drilled for cables when using horizontal cable infill (except stair and ramp posts which must be field-drilled). Square posts can be fascia mounted, fascia bracket mounted, surface mounted, or stanchion mounted.
	We also offer a 45° corner post which allows single post construction at 45° corners. As with the square posts above, these extrusions come pre-cut and pre-drilled (except when used on stairs and ramps). They can be either surface mounted using a pre-attached standard 45° profile base plate, fascia mounted, or stanchion mounted.

Fascia Mount For side mounting to fascia boards, joists or walls. Fascia Mount posts come with pre-drilled bolt holes.	Surface Mount For top mounting to deck, patio or stair tread surfaces. (5" square base plates come pre-attached).
Fascia Bracket Mount For side mounting to fascia or rim joists when decking or nosing trim extends beyond the edge of the fascia board. Posts are attached using metal brackets that are available with a 1-1/4" stand-off. Railing must have a bottom rail when using this mounting method.	Stanchion Mount For mounting on stone or tile covered concrete slabs or on roof decks where penetration of waterproof roofing membranes must be minimized. Short stanchions are attached to the structural members prior to pouring the slab or laying the roof membrane. Railing posts are then sleeved over the protruding stanchion ends and secured with screws.

Customize Your Railing - DesignRail® Cap Rails Cap rails come in 5 styles and are sold in 10 and 20 foot lengths that can be trimmed to size in the field. Series 150 Cap Rails are used exclusively on stairs and are attached to the faces of the stair posts using Rail Connecting Blocks (RCBs). Series 200, 300, 350 & 400 Cap Rails rest on the tops of the posts and are secured with stainless steel screws. An Applied Grab Rail (see Additional Items) may be required to meet code for stair railings: check with your local building department.
	Series 150 Caps For Stairs (New) 2" wide graspable cap rail for stairs. Also see.
	Series 200 3-1/2" wide, rectangular cap rail. The flat surface is a convenient perch for your favorite beverage as you relax and gaze at the view. Requires an Applied Grab Rail when used on stairs.
	Series 300 Caps 1-1/2" radius cap rail. The smooth rounded shape offers a more contemporary accent to those less traditional architectural designs. Requires an Applied Grab Rail when used on stairs.
	Series 350 Caps (New) 3-1/2" elliptical cap rail. The sleek, stylish design offers another option for those who prefer a less angular cap rail appearance. Requires an Applied Grab Rail when used on stairs.
	Series 400 Caps Low profile cap for adding your own wood top rails (must be used with wood top rail to achieve necessary frame strength - wood top rails not included). Requires an Applied Grab Rail when used on stairs.